Shake table preliminary test for CFS Shear Wall experiment (2018-08-14)
Started tracking at 15:10 GPST from P472 and STPA.
STPB has a Topcon antenna connected to a Leica GMX102, appears to be incompatible. Same with SREF. 
Will try to swap out the Leica with a NetR9.
STPA is tracking fine.
Noticed at 17:25 that P472 was actually conencting to SIO5, the reason I couldn't get a good fix. Made the switch to port 9040.
Doerte set P472 to 10Hz tracking at 17:27
Noted series of shakings since 17:32
STPB up with Trimble NetR9 receiver at ~19:00
Set elevation angle to 5 degrees ~19:17 (only 5 satellites above 10 degrees)
Got STPB coordinates to converge ~19:27

Started tracking at @15:00
Changed to L1L2, multipath effects from shake table and east structure.
--Yehuda 2018-08-20 16:42 GPST
P472 back to 1Hz
--Yehuda 2018-08-21 23:00 GPST

Preparation for shear wall experiment

Collected ~2 hours of data
Also collected data on 10/17
--Yehuda 2018-10-23 until ~22:30 GPST